|Property||Test method||Standard Performance||Typical Performance|
|Tensile strength(MPa)||ASTM D 2671||≥ 10.4||11.5|
|Elongation(%)||ASTM D 2671||≥ 300||450|
|Tensile strength after aging(MPa)||UL224 158 ℃*168h||≥ 7.3||8.5|
|Elongation after aging (%)||UL224 158 ℃*168h||≥ 200||350|
|Dielectric strength(kV/mm)||IEC 60243||≥ 15||17.5|
|Volume resistivity( Ω.cm)||IEC 60093||≥ 1*1014||2.5* 1014|
|Property||Test method||Standard Performance|
|Water Absorption||ASTM D 570||＜ 0.2%|
|Softening Point(℃)||ASTM E 28||95|
|Strength of pearing (PE)||ASTM D 1000/td>||120N/25mm|
|Strength of pearing (AL)||ASTM D 1000/td>||80N/25mm|
“Samir Trading Corporation”, we are a name to reckon with in the field of Control Panel Accessories and Wiring Accessories.
We are Since 1982 in the Electrical Industry and in the Cable Tie industry since year 1986, with such a long experience we have the determination and the foresight to offer a wide range of high quality electrical products to Control panels manufacturers, Machine manufacturers, Electrical contractors, etc.
KSS is a leading manufacturer of cable ties and wiring accessories in Asia.KSS is an ISO9001 & ISO 14001 & OHSAS 18001 certificated company and has been approved by UL, CSA, VDE, DNV, GL, LLOYD, CE, ABS, IP68
We are manufacturer ofCable Tie Support/Tie Mounts/Cradle in Sure Stick Make. We produce one of the finest qualities of Cable tie mounts in different types of materials. Our wide range of Cable tie mounts serves all kinds of application.
Trusted suppliers and good people to deal with. Must contact if you need cables and tie.
Very nice, hardworking and genuine people.
Excellent! Proud to be associated with You.
Cable tie manufacturers.
Best company to deal for cable tie & control panel accessories in Ahmedabad 5 🌟 company.
Polyolefin Heatshrink Tubing is a type of plastic tubing that shrinks in diameter when heated. It is commonly used for insulation, protection, and strain relief of wires, cables, and other electrical components. The tubing provides a tight seal around the wires, which helps prevent moisture, dust, and other contaminants from entering the connection.
Polyolefin Heatshrink Tubing offers several advantages over other types of tubing. It has a high resistance to chemicals, UV rays, and abrasion, which makes it suitable for use in harsh environments. It also has a low shrink temperature, which means it can be easily and quickly applied with a heat gun or other heat source. Additionally, it is available in a wide range of sizes and colors, which makes it easy to match with different wire sizes and color codes.
To choose the right size of Polyolefin Heatshrink Tubing for your application, you need to measure the diameter of the wire or cable you want to insulate. The tubing should have a maximum expanded diameter that is slightly larger than the diameter of the wire, and a minimum recovered diameter that is smaller than the diameter of the wire. This will ensure a tight fit and a secure seal around the wires. Additionally, you should consider the shrink ratio of the tubing, which is the ratio of the expanded diameter to the recovered diameter. The higher the shrink ratio, the more the tubing will shrink when heated, which can be useful for covering irregular shapes or multiple wires.